NuCO₂ Introduces BeerBlast^TM

Ensure superior tasting Draft Beer and Maximize your bottom line profitability at the same time. We’ll show you how!

Quality Draft Beer Your Guests Expect
Your guests expect great tasting, high quality draft beer in your establishment. To achieve this, you need a consistent, reliable supply of pure Carbon Dioxide (CO₂) and Nitrogen (N₂) mixed in the right proportion for the draft beer of choice.

Brew Masters spend their entire careers perfecting the right mix of quality ingredients to make the perfect beer. We understand that beer operators do not have the time to perform this arduous task during a hectic day. BeerBlast^TM takes the time, effort and guesswork out of blending the perfect beer and helps you get back to what’s most important to you – your customers!

The Right Mix of CO₂ to N₂ is Critical to Producing a Great Tasting Draft Beer and Protecting Profitability
The right mix of CO₂ to N₂ is typically 60/40 for Domestic and Lager Beers and a 25/75 blend for Guinness to “push” a quality beer to the tap. An improper blend of beer will cause wasted products and kegs to be changed out prematurely or may cause the beer to become flat. The costs per month are significant and the revenues you can claim back in a year are staggering.

While we understand that there are a few alternatives that can be used to “push” beer to the tap, these alternatives produce inferior draft beers, unhappy customers, and reduce the significant profit potential that your beer operation can yield.

Here’s what can happen when using the wrong gas or improper blend to “push” your beer to the tap:

1. The results of using 100% CO₂ to “ push” beer to the tap.
   1. Over-carbonated beers
   2. Longer pour times for your employees
   3. Complaints from customers about suds or foamy beer
   4. Employees believe kegs are empty and change kegs too quickly
   5. Kegs that are changed out too early dramatically decrease your profit margins
      
      
2. The results of using blended 25/75 beer gas cylinders
   1. This causes under-carbonation, causing beer served to your customer to be flat
   2. Complaints from customers about flat, unappealing and poor quality beers
   3. Due to flat beer, revenue may diminish without you even knowing it since customers may not ask for another beer or switch to bottled beer
      
      
3. Compressed Air Blended with CO₂
   1. Oxygen ruins the flavor of the beer
   2. Promotes bacteria in beer lines
   3. Picks up odors from the surroundings
   4. Complaints from customers that the beers are flat and taste poor
   5. Employees change kegs with beer still remaining in the keg
   6. Kegs that are changed to quickly yield lower profit margins
      
      

How The BeerBlast_^TM System Works
The BeerBlast^TM System generates its own Nitrogen from the air and blends it with the correct ratio of CO₂*. The BeerBlast^TM system not only produces the sufficient quantity of Nitrogen simply generated from the air, but as needed, provides three precise mixtures of gas to meet your kegged product requirements.

The BeerBlast^TM System is light and compact and fits neatly on a wall. Moreover, the BeerBlast^TM system is easy to install and boasts the highest system reliability in the industry. All BeerBlast^TM Systems installed have experienced 100% success. The BeerBlast^TM System also includes a patented leak detection system for your peace of mind.

*We recommend using NuCO₂’s bulk CO2 system in conjunction with the BeerBlastTM system to ensure the highest quality mixed gas.

BeerBlast_^TM Leak Detection System
The patented BlastOffTM Leak Detection System will detect leaks within the downstream gas lines from the BeerBlast^TM to the kegs. Line leaks could be due to a keg not being tapped correctly, a beer gas line failing, regulator malfunction, etc. These leaks are potential safety hazards and deplete the gas powering the system. With this warning mechanism, it eliminates any downtime by notification of a leak when it occurs.

Once a leak has been detected, BeerBlast^TM can be set to initiate an audible buzzer or activate a warning light and/or shut off the BeerBlast^TM System until the problem has been remedied.

Service You Can Depend On
NuCO₂ offers free installation and maintenance of your BeerBlast^TM system. We will make an appointment to visit your location once per year to change your filter so you won’t need to do anything. Moreover, we have trained staff available 24/7 to answer any questions or concerns. NuCO₂ is the only company that can offer the BeerBlast^TM system nationwide and provide you with unparalleled service when and where you need us.

Click here for more details on nitrogen membranes.